Section VIIl. CONTROL BOX COMPONENTS
magneto switch and control switch.
a. Removal. Refer to figure 2-2 and remove the
c. Test. Test the magneto switch and the control
voltmeter and total time meter.
switch for proper operation.
b. Installation. Refer to figure 2-2 and install the
2-19. Instruction Plates
voltmeter and total time meter.
a. Removal. Refer to figure 2-2 and remove the
proper operation.
instruction plates.
b. Installation. Refer to figure 2-2 and install the
2-18. Switches
instruction plates.
a. Removal. Refer to figure 2-2 and remove
magneto switch and control switch.
