2-25. Fuel Strainer
strainer.
a. Removal.
b. Installation. Refer to figure 2-5 and install the
(1) Place fuel selector valve handle in OFF
fuel strainer.
position.
Figure 2-5. Fuel strainer and fuel pump, removal and installation.
6) inward (clockwise) increases the fuel suction and
results in a richer mixture. Turning the idle ad-
a. Removal.
j u s t i n g needle o u t w a r d (counter-clockwise) in-
(1) Place fuel selector valve handle in OFF
creases the quantity of air and results in a leaner
position.
mixture.
pump.
carburetor.
b. Installation. Refer to figure 2-5 and install the
c. Inspection.
fuel pump.
(1) Inspect the carburetor for damage or leaks.
c. Test. Test the fuel pump for proper operation.
( 2 ) Inspect the choke control assembly for
damage or broken cable. Replace a defective choke
a. Adjustment. If engine idles roughly, set the idle
cable.
adjusting needle for best low speed smooth
d. Installation. Refer to figure 2-6 and install the
operation. Turning the idle adjusting needle (fig. 2-
carburetor.