TM 5-6115-365-15
C3
Figure 20-4. Fuel system components
runners from racks if nylon is to be replaced.
c.
Reassembly.
Using
serviceable
parts,
reassembly is reverse of procedure b above. Attach
nylon runners with rivets. Make sure the roller supports
are attached with the beveled edge to the outside of
stancion.
d.
Installation. Installation is reverse of procedure
a above. Cover nylon runners with cloth tape if load is
not to be reinstalled on rack. Touch up with paint after
reassembly.
20-10. Accessory Box
(Fig. 20-5)
a.
Removal
(1)
Remove contents of box and stow in safe
place.
(2)
Remove nuts, washers, and capscrews
that secure box to trailer bed. Remove box.
b.
Installation. Installation is reverse procedure of
removal, a above.
20-5
