TM 9-6150-228-13&P
Table 2-1. Operator Preventive Maintenance checks maintenance checks and Services for Model PEU-155/E-
Continued
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not fully Mission
Capable If:
13
During
Top Panel
Check that indicator lights glow when power
is
applied to associated load terminals
Indicator light not
glowing
High voltage is present in this equipment
during operation. Do not attempt making any
repairs without first shutting down all input
power from the power distribution panel.
Failure to observe this warning could result in
serious injury or death.
14
After
Top panel
Clean face of circuit breakers with a dry rag
(item 5, Appendix E). Wipe internal and
extemal surface with a damp, dean rag.
15
After
Connectors
Check that unused connectors are capped
High voltage is present in this equipment
during operation. Do not attempt making any
repairs without first shutting down all input
power from the power distribution panel.
Failure to observe this warning could result in
serious injury or death.
16
After
Cable
assemblies
Clean with a rag (item 5, Appendix E) soaked
assemblies in mild detergent solution (item 2,
Appendix E). Dry surface with a damp, dean
rag (item 5, Appendix E).
2-6
