TM 9-6115-730-24
0119
INSPECTION OF INSTALLED ITEMS
1. Inspect rocker arm shaft (Figure 2, Item 17) for minimum diameter (Dimension A) of 1.3382 in. (33.99 mm).
2. Inspect all parts for signs of excessive wear or cracking.
3. Inspect bore in unit injector rocker arm bearing (Figure 2, Item 22) for inside diameter (Dimension B) of 1.340-
1.341 in. (34.035-34.065 mm).
4. Inspect bore in unit injector rocker arm (Figure 2, Item 13) for inside diameter (Dimension C) of 1.456-1.457
in. (36.98-37.02 mm).
Figure 2. Rocker Shaft Inspection.
END OF TASK
