TM 9-6115-730-24
0011
TROUBLESHOOTING FAILURES WITHOUT FAULT CODES - Continued
MALFUNCTION
Electrical Connections Faulty.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Inspect harness connector ENG-P2 and ECM mating connector J2 and unit
injector cable connectors ENG-P300 and J300 (WP 0088). Ensure connectors
are properly seated and secure.
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Unresolved Diagnostic Codes.
CORRECTIVE ACTION
Check for inactive diagnostic codes in historical log that relate to exhaust temperature.
SYMPTOM
43.
Fuel in Engine Oil.
MALFUNCTION
Fuel Unit Injectors Leaking.
CORRECTIVE ACTION
STEP 1.
Inspect unit injectors for leaking seals and damage and to ensure unit injectors
are secure. Tighten unit injectors or replace as required (WP 0118).
STEP 2.
Verify the problem has been resolved.
MALFUNCTION
Fuel Lines Leaking.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Inspect fuel hose connected to the cylinder head for leaks. Replace seals or fuel
hoses as required (WP 0057).
STEP 3.
Verify the problem has been resolved.
0011-56
