TM 9-6115-730-24
UNIT (FIELD) LEVEL MAINTENANCE
TACTICAL QUIET GENERATOR 200 kW, 50/60 Hz MEP-809A/PU-809A
WIRE LISTS
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic's (WP 0123, Item 1)
FO-1
FO-2
Personnel Required
FO-3
FO-4
One
TM 55-1500-323-24
WARNINGS
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
DO NOT wear loose clothing when performing checks, services and maintenance. Failure to
comply can cause injury or death to personnel.
High voltage is produced when this generator set is in operation. Make sure unit is completely shut
down and free of any power source before attempting any repair or maintenance on the unit.
Failure to comply can cause injury or death to personnel.
High voltage is produced when the generator set is in operation. Never attempt to start or
maintain the generator set unless it is properly grounded. Failure to comply can cause injury or
death to personnel.
DC voltages are present at generator set electrical components even with generator set shut
down. Avoid shorting any positive with ground/negative. Failure to comply can cause injury to
personnel and damage to equipment.
Metal jewelry will conduct electricity. All jewelry can become entangled in generator set
components. Remove all jewelry when working on generator set. Failure to comply can cause
injury or death to personnel by electrocution.
Ensure that the engine cannot be started while maintenance is being performed (ENGINE
CONTROL switch set to OFF/RESET; Battery disconnect switch is OFF; DEAD CRANK SWITCH
is OFF).
INTRODUCTION
This work package contains the wire lists for the 200 kW Tactical Quiet Generator Set (TQG). The wire lists are
used in conjunction with the schematic diagrams (Figure FO-1 thru FO-4, located in the back of this manual) during
troubleshooting and repair of the TQG. All wiring information is provided, including wire color, wire gauge, wire type
by part number/specification, and wire splice data. The wire lists are double ended which lists each wire path twice.
The second wire path listing transposes the origin and destination components. Double ending a wire list facilitates
locating a particular wire path by permitting a search for either component as the origin.
0088-1
