TM 9-6115-730-24
0011
TROUBLESHOOTING FAILURES WITHOUT FAULT CODES - Continued
MALFUNCTION
Oil Filter Defective.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Replace the engine oil filter. Inspect the engine oil check valve in the oil filter
base. Clean or replace components as required (WP 0107).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Engine Oil Cooler Defective.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Check for engine oil leaks around the engine oil cooler also check for engine oil
in engine coolant. Repair or replace engine oil cooler (WP 0108).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Fuel in Engine Oil.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Refer to Fuel in Engine Oil procedure troubleshooting procedure
(SYMPTOM 43).
0011-59
