TM 9-6115-730-24
0011
TROUBLESHOOTING FAILURES WITHOUT FAULT CODES - Continued
MALFUNCTION
Turbocharger Seals Failure.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
present, replace turbocharger (WP 0103).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Worn or Damaged Valve Guide Seals.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Inspect valve guide seals for wear or damage. Replace cylinder head (WP 0120).
STEP 3.
Verify the problem has been resolved.
MALFUNCTION
Internal engine oil leakage/Excessive Blow-by.
CORRECTIVE ACTION
STEP 1.
Internal engine oil leakage is suspected. Replace engine (WP 0096).
STEP 2.
Verify the problem has been resolved.
SYMPTOM
38.
Engine Oil Temperature Too High.
MALFUNCTION
Incorrect Engine Oil Specification/Rating.
CORRECTIVE ACTION
STEP 1.
On EMCP set ENGINE CONTROL switch to OFF/RESET. Set Battery
Disconnect Switch to OFF. Set DEAD CRANK SWITCH to OFF.
STEP 2.
Verify correct engine oil type and temperature rating for rated engine (WP 0016).
STEP 3.
Verify the problem has been resolved.
0011-51
