TM 9-6115-730-10
MALFUNCTION/SYMPTOM INDEX
The Malfunction/Symptom Index provides a quick reference by work package number and page number for error
messages and troubleshooting procedure malfunctions.
Work Package and Page No.
Malfunction/Symptom
Dedicated Fault Indicators
1.
EMCP AC CIRCUIT INTERRUPTER lamp does not light when TQG is
connected to load.
2.
EMCP panel lamp is not lit.
3.
GSC LOW OIL PRESSURE red indicator flashes.
4.
GSC HIGH WATER TEMP red indicator flashes.
5.
GSC LOW COOLANT LEVEL red indicator flashes.
6.
Alarm module OVERCURRENT amber indicator flashes. TQG disconnects
from load.
7.
Alarm module GENERATOR OVERLOAD amber indicator flashes. TQG
disconnects from load.
8.
Alarm module LOW FUEL LEVEL red indicator glows steady. TQG engine
shuts down.
9.
Convenience receptacle on PARALLELING RECEPTACLES panel has no
power.
10.
Winterization kit (Issued to selected units only) is not operating. DIAGNOSTIC
light is red.
GSC Alarm Fault Codes
11.
AL1 High Water Temperature
Troubleshoot as Malfunction
12.
AL2 Low Water Temperature
AL2 can be a transient code
that will go away after the
TQG is running. If not,
notify maintenance.
13.
AL3 Low Engine Oil Pressure
Troubleshoot as Malfunction
14.
AL4 Fault Detected by Engine ECM
Notify maintenance.
15.
AL5 Low Engine Coolant Level
Troubleshoot as Malfunction
16.
AL6 High Engine Oil Temperature
Troubleshoot as Malfunction
maintenance.
17.
AL7 Generator Over Voltage
Notify maintenance.
0009 00-1