TM 9-6115-729-24
0051
INSTALLATION - Continued
3. Put one end of cable through each of three current transformers (Figure 1, Sheet 2, Item 9) to be installed
above the generator, remove tags, and connect end of each cable.
4. Install three current transformers (Figure 1, Sheet 2, Item 9), locknuts (Figure 1, Sheet 2, Item 13), twelve
lockwashers (Figure 1, Sheet 2, Item 11), washers (Figure 1, Sheet 2, Item 12), and screws (Figure 1,
Sheet 2, Item 10).
5. Install current transformer bracket (Figure 1, Sheet 1, Item 8), two washers (Figure 1, Sheet 1, Item 7),
lockwashers (Figure 1, Sheet 1, Item 6), and screws (Figure 1, Sheet 1, Item 5).
6. Put one end of cable through each of three current transformers (Figure 1, Sheet 1, Item 1) to be installed
adjacent to AC Circuit interrupter, remove tags, and connect end of each cable.
7. Install three current transformers (Figure 1, Sheet 1, Item 1), twelve washers (Figure 1, Sheet 1, Item 4),
lockwashers (Figure 1, Sheet 1, Item 3), and screws (Figure 1, Sheet 1, Item 2).
8. Close left and right rear doors.
END OF TASK
END OF WORK PACKAGE
0051-5/6 blank
