TM 9-6115-729-24
0050
INSTALLATION
1. Position battery disconnect switch (Figure 1, Item 9) near where it is to be installed. Remove tags and connect
battery cable 2A40 (Figure 1, Item 10) and battery cable 1A40 (Figure 1, Item 1).
2. Install battery disconnect switch (Figure 1, Item 9) with four washers (Figure 1, Item 8), lockwashers (Figure
1, Item 7), and screws (Figure 1, Item 6).
3. Remove tag and connect battery cable 12A40 (Figure 1, Item 4) to right battery BT1 negative terminal (Figure
1, Item 5).
4. Remove tags and connect battery cable 1C40 (Figure 1, Item 2) and battery cable 1A40 (Figure 1, Item 1) to
left battery BT2 negative terminal (Figure 1, Item 3).
5. Close right and left side battery access doors.
END OF TASK
END OF WORK PACKAGE
0050-3/4 blank