TM 9-6115-729-24
0049
INSTALLATION
1. Install left battery BT2 (Figure 1, Item 16) so that positive terminal (Figure 1, Item 3) is close to doorway.
2. Install right battery BT1 (Figure 1, Item 15) so that negative terminal (Figure 1, Item 2) is close to doorway.
3. Position battery hold down angle (Figure 1, Item 13) on three threaded rods (Figure 1, Item 14) and install
three washers (Figure 1, Item 12), lockwashers (Figure 1, Item 11), and nuts (Figure 1, Item 10).
4. Remove tags and connect battery cables 24A40 (Figure 1, Item 8) and 24D40 (Figure 1, Item 7) to right
battery BT1 positive terminal (Figure 1, Item 9).
5. Remove tags and connect battery cable 12A40 (Figure 1, Item 4) to left battery BT2 positive terminal (Figure 1,
Item 6) and to right battery BT1 negative terminal (Figure 1, Item 5).
6. Remove tags and connect battery cables 1A40 (Figure 1, Item 2) and 1C40 (Figure 1, Item 1) to left battery
BT2 negative terminal (Figure 1, Item 3).
7. Close left and right side battery access doors.
END OF TASK
END OF WORK PACKAGE
0049-4
