TM 9-6115-729-24
0052
REMOVAL - Continued
NOTE
Cut tiedown straps as required.
2. Tag and disconnect wire harness from potential transformer PT3 (Figure 1, Item 1) and PT2 (Figure 1,
Item 2).
3. Remove four screws (Figure 1, Item 3), washers (Figure 1, Item 5), lockwashers (Figure 1, Item 4), and
transformer PT3 (Figure 1, Item 1). Repeat for transformer PT2 (Figure 1, Item 2).
4. If removing bracket, remove two screws (Figure 1, Item 6), lockwashers (Figure 1, Item 7), and washers
(Figure 1, Item 8).
5. If removing bracket, remove two screws (Figure 1, Item 9), lockwashers (Figure 1, Item 10), washers
(Figure 1, Item 11), and potential transformers bracket (Figure 1, Item 12).
END OF TASK
INSTALLATION
NOTE
Install tiedown straps as required.
1. If bracket was removed, install potential transformer bracket (Figure 1, Item 12), washers (Figure 1, Item 11),
lockwasher (Figure 1, Item 10), and two screws (Figure 1, Item 9).
2. If bracket was removed, install two washers (Figure 1, Item 8), lockwasher (Figure 1, Item 7), and screws
(Figure 1, Item 6).
3. Install potential transformer PT2 (Figure 1, Item 2), four lockwashers (Figure 1, Item 5), washers (Figure 1,
Item 4), and screws (Figure 1, Item 3). Repeat for potential transformer PT3 (Figure 1, Item 1).
4. Remove tags and connect wire harness to potential transformers PT2 (Figure 1, Item 2) and PT3 (Figure 1,
Item 1).
5. Install generator access cover (WP 0032).
0052-2
