TM 9-6115-729-10
100 kW TACTICAL QUIET GENERATOR SET
0012 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING LUBRICATION
INSTRUCTIONS Continued
Table 1. Preventive Maintenance Checks and Services Continued.
LOCATION/
NOT FULLY
ITEM TO
MISSION
ITEM
NO.
INTERVAL
CHECK/SERVICE
PROCEDURE
CAPABLE IF:
Fuel Filter/Water
Drain water from fuel filter/water separator
Fuel filter/water
Separator
separator contains
Continued
sediment and/or
water or cannot be
drained.
9
Before
Lubrication System
Inspect lubrication system for leaks,
Class III leaks.
damaged, loose, or missing parts.
Damaged, loose, or
missing parts.
Check engine oil level (WP 0017 00).
Oil level is below cold
(low) oil level mark
on dipstick.
Check engine oil for contamination.
Engine oil is milky,
discolored, or shows
signs of
COOLING
SYSTEM
__________
10
Before
Radiator
WARNING
Cooling system operates at high
temperature and pressure. Contact
with high pressure steam and/or liquids
can result in burns and scalding. Shut
down generator set, and allow system to
cool before performing checks, services
and maintenance. Failure to comply
can cause injury or death to personnel.
Check radiator for leaks, damage or missing
Class III leaks.
parts.
Coolant fill cap
missing or
damaged.
11
Before
Fan Guards
Check fan guards and shroud for dirt and
Dirt or debris block
debris blocking air flow.
air flow.
12
Before
Hoses
Check hoses for leaks or cracks.
Class III leaks.
13
Before
Cooling Fan
Check fan for damage or looseness.
Cooling fan is
damaged or loose.
14
Before
Fan Belts
Inspect belts to ensure that they are not
Broken, missing or
missing. Inspect for cracks, fraying, and
loose belt(s).
looseness.
0012 00-6
