ENGINE LUBRICATION SYSTEM MAINTENANCE
THIS WORK PACKAGE COVERS:
Tools and Special Tools
On EMCP, set ENGINE CONTROL switch to OFF/RESET and let cool.
Open engine access doors located at front left and right sides of generator set.
Inspect engine assembly for oil leaks.
Check for damage, proper mounting, or missing parts.
The dipstick is marked so that the crankcase oil can be checked while engine is stopped or running.
Always make sure dipstick is checked. Remove oil filler cap when checking oil with engine
Remove oil dipstick (1) to check engine crankcase oil level. Dipstick is marked on both sides for stopped or running
engine. If crankcase oil level is below ADD mark on dipstick, for either stopped or running engine, perform SERVICE
Close both engine access doors.
END OF TASK
On EMCP, set ENGINE CONTROL switch to OFF/RESET and let engine cool.
Open right engine access door.
Remove oil filler cap (2).
Add oil to engine crankcase for operations temperature range per Table 1.