ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
16. Complete the installation of the Auxiliary Fuel System as follows:
a.
Insert the fuel drum adapter assembly, Item No. 1, into the auxiliary fuel can and secure by
depressing the cam handle.
b.
Attach the quick disconnect half coupling, Item No. 3, of the suction side of fuel primer bulb
assembly, Item No. 2, to the male quick disconnect, Item No. 4, on the fuel drum adapter
assembly, Item No. 1.
c. Complete the assembly by attaching the quick disconnect half coupling, Item No. 3, of the
pressure side of fuel primer bulb assembly, Item No. 2, to the male quick disconnect, Item
No. 4, on the 3-way valve assembly. Turn the handle on the 3-way valve, Item No. 11, to the
auxiliary fuel tank position. Prime the system by squeezing the bulb several times. The set is
now ready to operate from the auxiliary fuel supply.
Disassembly Instructions
17. To disconnect the auxiliary fuel system, perform the following:
a. Turn the handle on the 3-way valve, Item No. 11, to the closed position.
b. Separate the fuel primer bulb assembly, Item No. 2, from the fuel drum adapter assembly,
Item No. 1, by releasing the quick disconnect coupling. Place the dust cap, Item No. 26, over
the male quick disconnect, Item No. 4, on the fuel drum adapter assembly, Item No. 1.
Insert the dust plug, Item No. 15, into the quick disconnect half coupling, Item No. 3, on the
fuel primer bulb assembly, Item No. 2.
c.
Separate the fuel primer bulb assembly, Item No. 2, from the 3-way valve, Item No. 11, by
releasing the quick disconnect coupling. Place the dust cap, Item No. 26, over the male
quick disconnect, Item No. 4, on the 3-way valve elbow, Item No. 13. Insert the dust plug,
Item No. 15, into the quick disconnect half coupling, Item No. 3, on the fuel primer bulb
assembly, Item No. 2.
WARNING
The fuels in this generator set are flammable. Do not
smoke or use open flames when performing aintenance.
Do not service or drain the fuel system while open
flames are present. Flames and explosion could result
in severe personal injury or death. Use a container or
cloth to catch any excess fuel to prevent spilling over
engine components. Be sure to properly dispose of
diesel fuel and diesel fuel soaked cloths.
d. Remove the strap, Item No. 23, from the auxiliary fuel can.
e. Remove the auxiliary fuel can from the fuel can bracket, Item No. 22.
f.
Remove the fuel can bracket, Item No. 22, by tilting the bracket to release it from the frame.
g. Store the fuel can bracket, Item No. 22, as shown in Figure L-5, by securing it with the strap,
Item No. 23.
h. Turn the handle on the 3-way valve, Item No. 11, to the primary fuel tank position. The set is
now ready to operate from the primary fuel tank.
L-6
