ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
4. Before assembling fittings, coat all male pipe threads with sealing compound, Item No. 24.
Pre-assemble 3-way valve, Item No. 11, with the following items: male pipe to hose straight adapter, Item
No. 14; male pipe to hose elbow, Item No. 10; male pipe to male pipe elbow, Item No. 13, male quick
disconnect to female pipe fitting, Item No. 4, and dust cap, Item No. 26; and two (2) hoses, Item Nos. 9
and 16.
Looking at the handle side of the 3-way valve, with screw holes facing down, install the fittings as follows:
a. Install male pipe to hose straight adapter, Item No.14, into the left side port of the 3-way valve.
b. Install male pipe to hose elbow, Item No. 10, into the center port of the 3-way valve.
c. Install male pipe to male pipe elbow, Item No. 13, into the right side port of the 3-way valve.
Attach dust cap, Item No. 26, onto elbow, Item No. 13, and install male quick disconnect to
female pipe fitting, Item No. 4, onto elbow, Item No. 13.
d. Slide one hose clamp, Item No. 5, onto hose, Item No. 16. Slide one end of hose,
Item No. 16, onto male pipe to hose straight adapter, Item No. 14. Slide the hose clamp, Item
No. 5, over the straight adapter, Item No. 14, and tighten.
e. Slide one hose clamp, Item No. 5, onto hose, Item No. 9. Slide one end of hose, Item No. 9,
onto male pipe to hose elbow, Item No. 10. Slide the hose clamp, Item No. 5, over the elbow,
Item No. 10, and tighten.
5.
Remove the existing pipe to tube adapter from the fuel drum adapter assembly, Item No. 1, and
replace it with male to male pipe nipple, Item No. 12. Discard the pipe to tube adapter. Attach dust
cap, Item No. 26, onto nipple, Item No. 12, and install male quick disconnect to female pipe fitting,
Item No. 4, onto nipple, Item No. 12.
6.
Pre-assemble fuel primer bulb assembly, Item No. 2, as follows:
a. Slide two (2) hose clamps, Item No. 5, onto hose, Item No. 6. Attach one end of
hose, Item No. 6, to the suction side of the fuel primer bulb, Item No. 7. Slide one hose
clamp, Item No. 5, over the primer bulb fitting and tighten. Insert male pipe to hose straight
adapter, Item No. 14, in the free end of hose, Item No. 6. Slide remaining hose clamp, Item
No. 5, over straight adapter, Item No. 14, and tighten. Attach dust plug, Item No. 15, onto
straight adapter, Item No. 14, and install female quick disconnect to female pipe thread half
coupling, Item No. 3, onto straight adapter, Item No. 14.
b. Slide two (2) hose clamps, Item No. 5, onto hose, Item No. 8. Attach one end of hose, Item
No. 8, to the pressure side of the fuel primer bulb, Item No. 7. Slide one hose clamp, Item
No. 5, over the primer bulb fitting and tighten. Insert male pipe to hose straight adapter, Item
No. 14, in the free end of hose, Item No. 8. Slide remaining hose clamp, Item No. 5, over
straight adapter, Item No. 14, and tighten. Attach dust plug, Item No. 15, onto straight
adapter, Item No. 14, and install female quick disconnect to female pipe thread half coupling,
Item No. 3, onto straight adapter, Item No. 14.
L-4