ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
NOTES TO FIGURE L-2:
1. INTERPRET DRAWING IN ACCORDANCE WITH MIL-STD-100.
2. MATERIAL: STRIP, 2.00 X .125, 1018 LOW CARBON STEEL IN ACCORDANCE WITH
ASTM A 108.
3. WELDING AND INSPECTION SHALL BE IN ACCORDANCE WITH AWS D1.1.
INSPECTION SHALL BE VISUAL. 5 X MAGNIFICATION SHALL BE USED TO EVALUATE
ANY AREAS QUESTIONED BY INITIAL VISUAL EXAMINATION.
4. TREAT AND PAINT IN ACCORDANCE WITH MIL-T-704, TYPE F.
5. MARK IN ACCORDANCE WITH MIL-STD-130, METHOD OPTIONAL. LETTERING SHALL
BE MINIMUM EXCEPT WHERE NOTED, LETTERING SHALL BE BLACK.
L-11
