ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
ROTOR
REAR
BEARING
SCREW
WASHER
REAR
HOUSING
ROTOR
BUSHING
FRONT
BEARING
FRONT
HOUSING
(3)
Press new rear bearing into rear housing. Then install dust cap.
(4)
Assemble alternator assembly. Refer to paragraph 5.28.e.
DC ALTERNATOR DIODES AND CAPACITORS. (MEP-501A)
a. Removal.
(1)
Remove four socket head screws (Figure 5-42) and carefully separate rear housing with stator from
rotor and front housing.
(2)
Remove brush holder and lift off capacitor leads (Figure 5-48).
(3)
Tag stator leads. Then remove nuts from heat sink terminals (6 places) and carefully separate stator
from rear housing.
(4)
Tag ends of capacitors . Then remove screws and lockwashers securing capacitors to heat sink and
remove capacitors.
(5)
Tag and disconnect diode leads from heat sink terminals.
