ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
Section IV. OPERATION UNDER UNUSUAL CONDITIONS
Subject
Para.
Page
Extreme Environmental Conditions ................................................................ 2.12
Nuclear, Biological, and Chemical Decontamination Procedures .................. 2.13
2.12
EXTREME ENVIRONMENTAL CONDITIONS.
Operation in Extreme Cold [23F (-5C) to -51F (-46C)].
a.
The generator is designed for use in ambient temperatures as low as -51F (-46C). To ensure satisfactory
operation, the following steps should be taken.
(1)
When possible, provide shelter from winds, freezing rain, and drifting snow. Position
generator set behind a wind barrier.
(2)
When operated in an enclosed area, be sure that proper provisions are made for removal
CAUTION
Be careful not to scrape, scratch, gouge, or in any way damage the
generator set. Avoid moving wiring as much as possible.
(3)
Remove accumulated snow or ice, if possible, by moving the generator set to a heated
enclosure and allow the accumulation to melt after first wiping or brushing away loose
deposits. When a heated enclosure is not available, remove snow or ice by wiping,
brushing, or carefully picking the deposits away.
(4)
For extreme cold weather conditions, MIL-PRF-46167, OW30 oil is recommended.
WARNING
Avoid contacting metal items with bare skin in extreme cold weather.
Failure to observe this warning can result in personal injury.
(5) Keep fuel tank at least 3/4 full during cold weather operations.
Operation in Extreme Heat [Above 120F (49C)].
b.
(1)
When operating in extremely hot temperatures, attempt to place the generator set in a
shaded area.
(2)
Provide as much ventilation as possible.
(3)
Keep all engine air passages and end cover openings clean and free of obstructions.
(4)
Make sure that air intake cover (2, Figure 2-1) is turned so that ambient air is directed to
(5)
Do not completely fill fuel tank. Leave one inch for fuel expansion.
(6)
Use MIL-PRF-2104 GR OE/HDO-30 (Item 14, Appendix E) lubricating oil in diesel engine