ARMY TM 9-6115-673-13&P
AIR FORCE TO 35C2-3-512-1
OIL
DECOMPRESSION
LEVER
RUBBER PLUG
AB
ROCKER ARM
COVER
(c) % LOAD meter (13) under no load condition should read 0 (%). The reading will vary
as the demand changes (from 0 to 125%).
NOTE
Under normal conditions, allow the diesel engine to warm-up for
five minutes before applying a load. If necessary, the load can
be applied immediately.
(16) Switch ON-OFF load circuit breaker (10) to ON to apply load.
(17) Perform all D (During) PMCS procedures in accordance with Table 2-2.
e.
Stopping Procedure.
(1) Switch ON-OFF load circuit breaker (10, Figure 2-1) to OFF position and allow engine to
run approximately 3 minutes with no load.
(2) Press engine STOP lever (5).
(3) Perform all A (After) PMCS procedures in accordance with Table 2-2.
