ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-200
4.13.3 Magnetic Pickup MPU.
a. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Open left side engine compartment access doors (Figure 1-3).
(4)
Disconnect electrical plug connector from magnetic pickup (4, Figure 4-30).
(5)
Loosen locknut (5), and remove magnetic pickup (4) from flywheel housing.
b. Service.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Remove magnetic pickup, refer to paragraph 4.13.3.a.
__________
WARNING
Cleaning with compressed air can cause flying particles. When using
compressed air, wear protective glasses and use clean, low pressure air, less
than 30 psi (206.8 kPa). Failure to comply can cause eye injury.
__________
WARNING
Dry cleaning solvent is flammable and toxic to eyes, skin, and respiratory tract.
Skin and eye protection is required when working in contact with dry cleaning
solvent. Avoid repeated or prolonged contact. Work in ventilated area only.
Failure to comply can cause injury or death to personnel.
(3)
Clean magnetic pickup with dry, filtered compressed air, and wipe with a clean, lint-free cloth (Item
8, Appendix E) lightly moistened with dry cleaning solvent (Item 20, Appendix E).
(4)
Inspect magnetic pickup for cracked casing, stripped or damaged threads, corrosion, and bent or
broken connector pins.
(5)
Replace magnetic pickup if damaged.
(6).
Install magnetic pickup, 4.13.3.c.
c. Installation.
(1)
Screw magnetic pickup (4, Figure 4-30) into flywheel housing until pickup bottoms out on flywheel.
Back magnetic pickup out 1 1/2 turns. Tighten locknut (5).
(2)
Connect electrical plug connector to magnetic pickup (4). Remove tags.
