ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-202
(4)
Remove nut (6), lockwasher (7), key washer (8), and DEAD CRANK switch (9) from DEAD
CRANK bracket (11).
(5)
Tag and disconnect electrical leads from DEAD CRANK switch (9, Figure 4-30).
(6)
Connect electrical leads to DEAD CRANK switch (9). Remove tags.
(7)
Attach DEAD CRANK switch (9), key washer (8), lockwasher (7), and nut (6) to DEAD CRANK
bracket (11).
(8)
Close engine compartment doors.
(9)
Connect negative battery cable to battery, and close BATTERY ACCESS door.
4.13.5 Battery Current Transducer BCT.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open right side engine compartment access door, (Figure 1-2).
(3)
Verify that BCT (1, Figure 4-31) housing is not damaged and is securely mounted to its bracket.
(4)
Check plug P1 (2) and wires for broken or chaffed wires.
(5)
Close right side engine compartment access door, (Figure 1-2).
b. Testing.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open battery access door, (Figure 1-2). Disconnect negative battery cable.
(3)
Disconnect P1 (2) from J1 (3) at the battery current transducer. Refer to Schematic FO-1.
(4)
Apply 12VDC at P1 (2) positive DC to red wire, and negative DC to black wire.
(5)
Set multimeter to VDC and place positive test lead to green wire on P1(2). Place negative test lead
to black wire P1. Multimeter should indicate 5.9 VDC - 6.1 VDC.
(6)
If multimeter indicates value other than above, replace Battery Current Transducer (1).
c. Replacement.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open battery access door, (Figure 1-2). Disconnect negative battery cable.
(3)
Open right side engine compartment access door, (Figure 1-2).
(4)
Disconnect P1 (2) from J1 (3) at the battery current transducer.
