ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-146
c. Removal.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door, and disconnect negative battery cable.
(3)
Remove DCS control box assembly, paragraph 4.8.1.
(4)
Loosen hose clamp (4, Figure 4-20), and remove elbow (5) from air cleaner housing (3).
(5)
Remove nuts (6), lockwashers (7), washers (8), bolts (9), and air cleaner assembly (1) from
generator set.
(6)
Remove nuts (10), lockwashers (11), bolts (12), and mounting bracket (2) from air cleaner housing
(3).
d. Installation.
(1)
Using removed components, install mounting bracket (2, Figure 4-20), bolts (12), lockwashers (11),
and nuts (10) on air cleaner housing (3).
(2)
Using removed components, install air cleaner assembly (1), bolts (9), washers (8), lockwashers (7),
and nuts (6) on generator set.
(3)
Position elbow (5) and hose clamp (4) on air cleaner housing (3). Tighten hose clamp.
(4)
Install DCS control box assembly, paragraph 4.8.1.
(5)
Connect negative battery cable to battery. Close BATTERY ACCESS door.
4.9.3
Restriction Indicator.
a. Inspection.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open left side engine compartment access doors (Figure 1-3).
__________
WARNING
Exhaust system can get very hot. Allow system to cool before performing
maintenance. Failure to comply can cause severe burns and injury to
personnel.
NOTE
Restriction indicator is located halfway between the left side engine access door and
the rear of the generator set. It may be necessary to use a flashlight to see the
indicator.
(3)
Inspect restriction indicator (13, Figure 4-20) for cracks, stripped threads, or other damage.
(4)
Close engine compartment access doors.
