ARMY TM 9-6115-672-14
AIR FORCE TO 35C2-3-444-32
MARINE CORPS TM 09244A/09245A-14
4-151
In step (1), apply sealing compound (Item 22, Appendix E) to pipe threads of
components as they are installed.
(1)
Install nipple (26), elbow (25), nipple (24) elbow (23) and adapter (22) to head (5) of crankcase
breather filter (18). On other side of head (5), install adapter (19) to crankcase breather filter (18).
(2)
Install flex hose (10) to crankcase breather and flex hose (21) to exhaust pipe.
(3)
Position bracket (17) on crankcase breather filter assembly (18) with arrow aligned as noted in step
(5), and secure with lockwashers (16) and screws (15).
(4)
Position bracket (17) on engine air intake pipe (20), and secure bracket to pipe with hose clamps
(13).
(5)
Connect flex hoses (10 and 21) to adapters (19 and 22), and secure with hose clamps (9 and 13).
(6)
Close engine compartment access doors.
4.10
MAINTENANCE OF ENGINE COOLING SYSTEM.
__________
WARNING
When disconnecting or removing batteries, disconnect the negative lead that
connects directly to the grounding stud first. Disconnect the negative end of
the interconnection cable next. When installing batteries, reverse the
connection sequence. Failure to comply can cause serious personal injury.
4.10.1 Engine Cooling System.
a. Testing.
(1)
Shut down generator set, paragraph 2.11.2.
__________
WARNING
Cooling system operates at high temperature and pressure. Contact with high
pressure steam and/or liquids can result in burns and scalding. Shut down
generator set, and allow system to cool before performing checks, services, and
maintenance. Failure to comply can cause injury to personnel.
(2)
Slowly remove radiator cap (1, Figure 4-22) from filler neck (2).
(3)
Install cooling system pressure tester (Appendix B, Section III) in filler neck (2).
(4)
Open engine compartment access doors (Figures 1-2 and 1-3).
