ARMY TM 9-6115-671-14
AIR FORCE TO 35C2-3-446-32
MARINE CORPS TM 09249A/09246A-14
4-205
b. Replacement.
(1)
Shut down generator set, paragraph 2.11.2.
(2)
Open BATTERY ACCESS door (Figure 1-2), and disconnect negative battery cable.
(3)
Open right side engine compartment access doors (Figure 1-2).
(4)
Remove plug (1, Figure 4-32), open drain valve (4), and drain engine oil into suitable container.
(5)
Loosen hose clamps (2), and remove oil drain hose from adapters (3 and 7).
(6)
Remove adapter (3) from drain valve (4).
(7)
Remove drain valve (4) from pipe fitting (5).
(8)
Remove pipe fitting (5) from skid base fitting (6).
(9)
Apply sealing compound (Item 22, Appendix E) to threads of pipe fitting (5, Figure 4-32). Install
pipe fitting (5) on skid base fitting (6), and drain valve (4) on pipe fitting.
(10) Apply sealing compound (Item 22, Appendix E) to pipe threads of adapters (3 and 7). Install
adapter on drain valve (4).
(11) Position hose clamp (2) on oil drain hose. Connect hose to adapters (3 and 7), and tighten hose
clamp.
(12) Apply sealing compound (Item 22, Appendix E) to threads of plug (1). Install plug on skid base
fitting (6).
(13) Service lubrication system, paragraph 3.3.8.
(14) Check engine oil drain line and valve for leakage.
(15) Connect negative battery cable to battery, and close BATTERY ACCESS door.
(16) Close engine compartment access doors.
