TM 9-6115-669-13&P
I N S P E C T I O N
a.
Install cable (6) in PDU (1) securing with nut (5) using the shop manufactured wrench.
b.
Install cables on terminal strip.
c.
Install connection panel (4) with rubber flap. Refer to paragraph 5.17.
d.
Remove stanchion by PDU (1).
e.
Stow prop (3), close access door (2) and secure.
f.
Install stanchion by PDU (1).
g.
Install cable to Generator Set 160 kW. Refer to paragraph 4.19.
h.
Connect load bank to generator set and perform procedures in paragraph 4.34.
Change 1
5-17
