TM 9-6115-664-13&P
4-34.
NATO RECEPTACLE MAINTENANCE
This task covers inspection and repair.
INITIAL SETUP
Tools:
Equipment Condition:
Shop Equipment, Automotive Maintenance
APU Shut Down
and Repair (Item 1, App. B)
NATO Plug Disconnected
A.
REMOVAL
WARNING
Disconnect
electrical
cable
from
NATO receptacle before performing
any maintenance on the fuel module.
Failure to do so can result in
electrical shock.
NOTE
Discard and replace all lockwashers
and locknuts when removed.
1.
Disconnect NATO plug from fuel module receptacle.
Disconnect vehicle fuel supply hose from quick
disconnect fitting.
2.
Open top rear cover on enclosure by turning latches.
3.
Slide fuel module cover latches (3, Figure 4-24)
back to disengage, and remove fuel module cover
(1) from enclosure (2).
4.
Remove cover latches (3) and locking screws only if
replacement is required.
5.
Tag negative electrical wire (4). Disconnect wire
from NATO receptacle (5) by removing bolt (6) and
lockwasher (7).
6.
Tag positive electrical wires (8, 9). Disconnect
wires from NATO receptacle (5) by removing bolt
(10) and lockwasher (11).
Figure 4-24. NATO Receptacle
4-86
