TM 9-6115-650-14&P
Figure 5-5. Power Plant Markings.
Section Ill. GENERATOR SET
5-7. Generator Set Replacement. (See figures 5-6 and 5-7. Power Plant AN/MJQ-25 has two generator
sets. Replacement procedures are identical for both.
a. Removal.
(1)
(2)
(3)
Remove fitted cover (paragraph 3-11, a.(1)).
Remove six bow assemblies (paragraph 3-11, b.(1)).
Disconnect all power cables and ground wires (1, figure 5-6) from generator set (2).
NOTE
The beveled washers (6) may have been welded in place.
Remove four screws (3), four Iockwashers (4), and four beveled washers (5), securing generator set (2),
to mounting rails (6) on trailer bed (7).
Remove engine oil drain hose (8) from grommet in trailer bed (7), if installed.
(4)
(5)
5-9
