TM 9-6115-650-14&P
Figure 5-4. Accessory Box Repair.
b. Footmans Loop Replacement.
(1) Remove two screws (4), two flat washers (5), and two self-locking nuts (6) securing footmans loop (7) to
accessory box lid.
(2) Position new footmans loop (7) on accessory box (3) and secure with two screws (4) two washers (5),
and two self-locking nuts (6).
5-6. Marking. (See figure 5-5.) The power plant four-digit registration number, preceded by the prefix “VC” and
the words “U.S. ARMY,” is marked in three places on the trailer. Marking is done in accordance with
MIL-STD-642. On the fender, over each wheel, “T.P. 50 PSI” is marked in 1.00±.12 inch high characters in
accordance with MIL-STD-1 30. On the switch box, “GEN 1”, “GEN 2“ and “OFF are marked on the cover at their
respective switch lever positions and “E1” and “E2” are marked next to their respective ground terminal studs.
Figure 5-5 shows the approximate location of markings on the power plant. If required, touch-up painting of the
base color shall be done in accordance with MIL-T-704, Type F, color Green, No. 383 of MIL-C-46168. When
power plant has been painted in camouflage, replacement parts must be painted to match authorized patterns and
colors as specified in TB 43-0148. Camouflage painting shall be done in accordance with MIL-C-53072.
5-8
