TM 9-6115--650-14&P
Table 4-1. Unit Preventive Maintenance Checks and Services (PMCS) (cont).
17
18
19
20
21
22
23
24
H - Hours of operation
M - Monthly
(As indicated)
(100 hours)
Reflectors
Data Plates and Markings
Support Leg Assembly
Rear Leg Prop Assembly
Suspension Assemblies
Axle
Wheels and Tires
Brakes
S - Semiannually
A - Annually
(500 hours)
(1,000 hours)
Replace any cracked, broken, or missing
reflectors.
Make sure data plates are legible and secure.
Replace illegible data plates.
Inspect brackets and leg for bent or broken parts.
Inspect bracket and leg prop for bent or broken
parts.
a.
b.
c.
a.
b.
a.
b.
a.
b.
c.
d.
e.
Inspect shackles, bearings, pins, leaf springs
and spring eyes for damage or broken parts.
Inspect mounting brackets for cracks or loose
or missing hardware.
Inspect shock absorbers for damage or leaks.
Check for damaged axle tube.
Check for loose or missing U-bolts or nuts.
Check serviceability of tires as indicated in
TM 9-2610-200-24.
Tighten wheel stud nuts.
Inspect brake linings for wear. Replace if
brake shoe lining is less than 1/8-inch (3.2 mm)
thick.
Inspect brake adjusting screw, retaining screw,
retaining pins, springs and clips for corrosion
and wear.
Inspect hydraulic wheel cylinders for leaks.
Inspect master cylinder for leaks or low
fluid level. Fill to within 1/2 inch from top.
Adjust brakes (page 4-52,
TM 9-2330-213-14&P).
4-11
