ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
NOTES:
PROCEDURES:
2. Refer to TM 9-6115-644-24P for materials
1. Dimensions shown are in inches.
required.
1. Cut wire (1) to length indicated.
2. Strip 0.75 inch of insulation sleeving from each end
of wire (1).
3. Mark insulation sleeving (2) with wire number
“165B0”, position on center of wire and shrink to fit.
4. Mark insulation sleeving (4) with “POSITIVE” and
slide over each end of wire (1).
5. Crimp terminal (3) on each end of wire (1).
6. Position insulation sleeving (4) as shown and shrink
to fit.
FIGURE D-4. Cable Assembly, Battery (P/N: 88-22181)
D-4
