ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-446-12
MARINE CORPS TM 09249A/09246A-24/2
NOTES:
PROCEDURES:
1. Dimensions shown are in inches.
1. Cut wire (1) to length indicated.
2. Refer to TM 9-6115-644-24P for materials
2. Strip 0.75 inch of insulation from each end of wire (1).
required.
3. Position insulation sleeving (2) on center of wire,
mark with wire number “100B0” end shrink to fit.
4. Crimp terminal (3) on each end of wire (1).
FIGURE D-2. Cable Assembly, Battery (P/N: 88-22178)
D-2
