ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
FIGURE 3-14. Load Output Terminal Board
aw. Scribe mark on generator drive disc and engine flywheel for alignment of bolts during installation.
ax.
Remove bolts (35) and lockwashers (36) securing generator disc drive to engine flywheel.
WARNING
Rated capacity of overhead hoist should be at least 1,500 Ibs (680 kg). Using a hoist with
less capacity could result in equipment damage, personal injury, or death.
ay.
Attach lifting harness to engine and overhead hoist. Take up slack.
az.
Remove bolts (38) and lockwashers (39) securing generator to flywheel housing.
ba.
Remove nuts (1), washers (2), snubbing washers (3), and bolts (4) securing mount brackets (5) to skid base.
bb.
Remove nuts (1, FIGURE 3-15) lockwashers (2), bolts (3), and radiator mounting bracket (4) from engine mount
brackets (5).
3-22 Change 1