b.
c.
d.
e.
2-74-3
a.
b.
c.
ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
Remove air cleaner element, paragraph 2-74-1.
Inspect element (14, FIGURE 2-21) for debris and damage, replace as necessary.
Wipe inside of air cleaner housing (7) with cleaning cloth (Item 8, Appendix C).
Install air cleaner element, paragraph 2-74-3.
Install filter element (14, FIGURE 2-21) in air cleaner housing (7) and tighten wing nut (13).
Install cover (12) on air cleaner housing (7), tighten caged wing nut.
Close air cleaner access door.
Installation
2-75 AIR CLEANER TUBING AND BREATHER.
2-75-1
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
2-75-2
a.
Inspection
Shut down generator set.
Open engine access doors.
Inspect all tubing for cracks, tears, and holes.
Inspect clamps for cracks.
Inspect breather and cover for dents, cracks, and corrosion.
Remove wing nut (21, FIGURE 2-21 ), washer (22), cover (23), rubber seal (24), and element (25) from breather
(20).
Inspect breather element for dogs, tears, or other damage.
Inspect threaded parts for damaged or stripped threads.
Replace parts as necessary.
Install element (25), rubber seal (24), cover (23), washer (22), and wing nut (21 ) on breather (20).
Close engine access doors.
Service
Remove air cleaner tubing and breather, paragraph 2-75-3.
WARNING
Dry cleaning solvent inflammable and toxic to eyes, skin, and respirator tract. Skin/eye
protection required. Avoid repeated/prolonged contact. Good general ventilation is nor-
mally adequate.
2-113
