ARMY TM 9-6115-644-24
AIR FORCE TO 35C2-3-446-12
MARINE CORPS TM 09249A/09246A-24/2
2-71-3 Installation.
a.
Install muffler supports (8, FIGURE 2-20) with bolts (5), lockwashers (6), washers (7), and nuts (10).
b.
Install pipe (4) with clamp (9). Do not tighten damp (9).
c.
Install left side air deflector and hardware securing top section floor panel, paragraph 2-16-4.
d.
Couple muffler (3) to pipe (4) with clamp (1). Do not tighten damp (1).
e.
Secure muffler (3) to supports (8) with bands (2).
f.
Tighten clamps (1) and (9).
g.
Install top housing frame and top housing panel, paragraph 2-16-4. Close engine access doors.
2-72 AIR RESTRICTION INDICATOR.
2-72-1 Inspection.
a.
Shut down generator set.
b.
Open left side engine access doors.
WARNING
The exhaust system can get very hot. Allow system to cool before checking air restriction
indicator. Failure to follow these instructions could result in severe burns and injuries.
c.
Inspect air restriction indicator (1, FIGURE 2-21) for cracks, stripped threads, or other obvious damage.
d.
Close engine access doors.
2-72-2
Removal.
a.
Shut down generator set.
b.
Open left side engine access doors.
c.
Unscrew air restriction indicator (1, FIGURE 2-21) from air cleaner housing (7).
2-72-3 Installation.
a.
Install air restriction indicator (1, FIGURE 2-21) on air cleaner housing (7). Tighten hand tight only.
b.
Close engine access doors.
2-73
AIR CLEANER ASSEMBLY.
2-73-1 Inspection.
a.
Shut down generator set.
2-110
Change 1
