ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
NOTES:
1.
Dimensions shown are in inches.
2.
Refer to TM 9-6115-643-24P for materials required.
PROCEDURES:
1.
Remove and discard terminals supplied with fuel pump (1).
2.
Strip 0.125 inch of insulation from end of each pump (1) lead.
3.
Crimp pin (2) on end of each lead.
4.
Insert pins (2) into housing (3) with red wire in position 1 and black wire in position 2.
5.
Mark strap (4) with “P11” and install in position shown.
FIGURE D-13. Pump Assembly, Fuel (P/N: 88-22546)
D-13
