ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
NOTES:
1.
Refer to TM 9-6115-643-24P for materials required and positioning of resistors by ohm rating.
PROCEDURES:
1.
2.
3.
4.
Install screws (2) and insulated terminals (3) on bracket (1) as shown.
Solder diodes (4) to insulated terminals (3) as shown.
Install screws (5) resistors (6) and nuts (7) on bracket (1) as shown.
Position wires (8) and solder connections as shown.
FIGURE D-16. Resistor-Diode Assembly (P/N: 88-22106)
D-16