ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
NOTES:
1.
Dimensions shown are in inches.
2.
Refer to TM 9-6115-643-24P for materials required.
PROCEDURES:
1.
Strip 0.25 inch of insulation from end of each transducer (1) lead.
2.
Crimp male terminal (2) on red wire and female terminal (3) on black wire.
FIGURE D-18. Transducer Assembly (P/N: 88-22550)
D-18
