ARMY TM 9-6115-643-24
AIR FORCE TO 35C2-3-445-22
NOTES:
1.
Refer to TM 9-6115-643-24P for materials required.
PROCEDURES:
1.
Position 0.75 inch of insulation sleeving (2) on each lead of diode (1), leaving 0.25 inch of bare wire on each
lead. Shrink sleeving to fit.
2.
Crimp and solder terminals (3) on end of each diode (1) lead.
FIGURE D-9. Diode Assembly (P/N: 88-22418-2)
D-9
