ARMY TM 9-6115-639-13 AIR FORCE TO 35C2-3-386-51 MARINE CORPS TM 10155A-13/1 4-51.  AUXILIARY FUEL PUMP MAINTENANCE This task covers removal, inspection, and installation. INITIAL SETUP Tools: Equipment Condition: Tool Kit, General Mechanic’s Automotive Generator set shut down (Para. 2-9) (Item 2, App. B, Sect. III) Battery cables disconnected Cable disconnected for SLAVE RECEPTACLE Parts / Materials: Teflon Tape (Item 19, App. E) Personnel Required: Two (2) personnel A.    REMOVAL. 1. Unlock main access cover latches and lift cover to open. 2. Disconnect plug to auxiliary fuel pump electrical wires. 3. Disconnect fuel hose (1, Figure 4-46) from elbow (12) by loosening clamp (2). 4. Disconnect fuel hose (4) from fuel strainer (6) by loosening clamp (5). 5. Remove auxiliary fuel pump (7) from fill pocket (8)  by  removing  two  screws  (9),  washers  (10), and locknuts (11). 6. Remove elbow (12) from auxiliary fuel pump (7).   Remove fuel strainer (6). 7. Disconnect   fuel   hose   (4)   from   fitting   (13)   by loosening clamp (5). 8. Remove  fitting  (13)  from  elbow  (14).    Remove cap  (17),  nut  (16),  washer  (15),  and  elbow  (14) from fill pocket (8). Figure 4-46.  Auxiliary Fuel Pump 4-126