ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-49. FUEL FILTER / WATER SEPARATOR MAINTENANCE - cont.
D. INSTALLATION.
1.
Apply sealant to threads of three screws (7,
Figure 4-44). Install filter / separator (5) onto
bracket (6) using two screws (7), washers (8), and
locknuts (9).
2. Apply teflon tape to threads of elbows (3). Install
elbows into filter / separator (5).
3.
Mate bracket (6) to enclosure. Secure using two
screws (10), washers (11), and locknuts (12).
4.
Connect fuel hoses (1) to elbows (3) and secure
by tightening hose clamps (2).
5.
Connect drain hose (4) to filter / separator (5).
Close drain valve (13).
6.
Reconnect battery. Close main access cover and
lock in place using latches.
7.
Place START / RUN/ STOP switch in RUN
position until fuel bowl is filled. Check for
evidence of leaks.
Figure 4-44. Fuel Filter / Water Separator
(Sheet 2 of 2)
4-122
