ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-49. FUEL FILTER / WATER SEPARATOR MAINTENANCE - cont.
B. REMOVAL.
1.
Unlock main access cover latches and lift cover
to open.
2.
Open filter / separator drain valve (13, Figure 4-
44) and drain fluid through hose (4). Close valve
(13) and disconnect hose (4).
3.
Disconnect fuel hoses (1) from elbows (3) by
loosening hose clamps (2).
4.
Remove elbows (3) from filter / separator (5).
5.
Remove filter / separator (5) from bracket (6) by
removing two screws (7), washers (8), and
locknuts (9).
6.
If removal of bracket (6) is required, remove air
inlet cover (Para. 4-47).
7.
Remove bracket (6) from enclosure by removing
two screws (10), washers (11), and locknuts (12).
C. INSPECTION.
1.
Inspect filter / separator for cracks, corrosion,
evidence of leakage, and obvious damage.
2.
Inspect fuel hoses for cuts, cracks, or other
damage.
3.
Remove and replace any component that is
damaged to the extent that it will effect the safe
operation of the generator set.
Figure 4-44. Fuel Filter / Water Separator
(Sheet 1 of 2)
4-121
