ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-46. MAIN ACCESS COVER MAINTENANCE - cont.
8.
Install cover supports (3) to skid base using screws (18), washers (19), locknuts (20), and spacers (21).
9.
Install swivel joints (15) onto cover supports (3) using washers (16) and locknuts (17).
NOTE
Be sure to check hinge gaskets (57, 58) and cover seal (59) for evidence of deterioration or
damage. Replace as required. The wide or bubble portion of the seal (59) should be installed
towards the hinge side of the cover (1).
10. Secure cover hinges (7, 11) to left side panel using six screws (8), washers (9), and locknuts (10).
11. Lift up cover (1) and place onto generator set, aligning hinge mounting holes. Install hinges onto cover (1)
using four screws (12), washers (13), and nuts (14).
12. Attach two cover supports (3) to cover (1) using screws (4), lockwashers (5), and washers (6).
13. Connect electrical plug (22) to fan (23). Secure electrical wiring to inside of cover (1) using two wire
clamps (24), screws (25), washers (26), and lockwashers (27).
14. Close main access cover (1) and lock latches (2).
4-105
Change 1
