ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-47. ENCLOSURE PANEL MAINTENANCE
This task covers removal, inspection, and installation.
INITIAL SETUP
Tools:
Equipment Condition:
Tool Kit, General Mechanic’s Automotive
Control box removed (Para. 4-12)
(Item 2, App. B, Sect. III)
Main access cover removed (Para. 4-46)
High temperature cooling fan and switch
Parts / Materials:
removed (Para. 4-48)
Sealant, RTV (Item 14, App. E)
Fuel fill pocket removed (Para. 4-50)
Power inverter / converter removed (Para. 4-52)
DC magnetic contactors removed (Para. 4-53)
Muffler disengaged from left side panel
A. REMOVAL.
1.
Remove three screws (2, Figure 4-38), washers (3), and locknuts (4) to release left side panel (1) from air
inlet panel (20).
2.
Remove five screws (5), ten washers (6), and five locknuts (7). Remove screw (8), two washers (9), and
locknut (10). Remove screws (11, 12) to release left side panel (1) from skid base.
3.
Remove two screws (13), washers (14), and locknuts (15) to release left side panel (1) from bracket (16).
Carefully lift left side panel off skid base.
4.
Remove angle bracket (16) from air inlet panel (25) by removing two screws (17), washers (18), and
locknuts (19).
5.
Remove air inlet cover (20) from air inlet panel (25) by removing nine screws (21), lockwashers (22), and
washers (23) from captive nuts (24). Remove acoustic insulation (33).
6.
Remove air inlet panel (25) from skid base by removing four screws (26), washers (27), and locknuts (28),
and four screws (29), washers (30), lockwashers (31), and captive nuts (32).
7.
Remove air outlet panel (34) from left side panel (1) by removing eleven screws (35), washers (36), and
locknuts (37).
8.
Remove louver (38) from air outlet panel (34) by removing four screws (39), lockwashers (40), and
washers (41).
9.
Remove acoustic insulation (42).
4-108
Change 1
