ARMY TM 9-6115-639-13
AIR FORCE TO 35C2-3-386-51
MARINE CORPS TM 10155A-13/1
4-47. ENCLOSURE PANEL MAINTENANCE - cont.
C. INSTALLATION.
1.
Install acoustic insulation (42, Figure 4-38).
2.
Apply RTV Sealant to top edge of louver (38). Install louver (38) onto air outlet panel (34) using four
screws (39), lockwashers (40), and washers (41).
3.
Apply RTV Sealant to the flange of the air outlet panel (34) that mates with the left side panel (1). Install
air outlet panel (34) onto left side panel (1) using eleven screws (35), washers (36), and locknuts (37).
4.
Install acoustic insulation (33). Install air inlet cover (20) onto air inlet panel (25) using nine screws (21),
lockwashers (22), washers (23), and captive nuts (24).
5.
Install angle bracket (16) onto air inlet panel (25) using two screws (17), washers (18), and locknuts (19).
6.
Install air inlet panel (25) onto skid base using four screws (26), washers (27), and locknuts (28), and four
screws (29), washers (30), lockwashers (31), and captive nuts (32).
7.
Position left side panel (1) onto skid base. Secure using five screws (5), ten washers (6), and five locknuts
(7). Install screw (8), two washers (9), and locknut (10). Install screws (11, 12).
8.
Attach left side panel (1) to air inlet panel (20) using three screws (2), washers (3), and locknuts (4).
9.
Attach left side panel (1) to bracket (16) using two screws (13), washers (14), and locknuts (15).
10. Install high temperature cooling fan and switch (Para. 4-48).
11. Install control box (Para. 4-12).
12. Install main access cover (Para. 4-46).
13. Install DC magnetic contactors (Para. 4-53).
14. Install power inverter / converter (Para. 4-52).
15. Install fuel fill pocket (Para. 4-50).
4-110
Change 1
