TM 55-2925-236-40
(2) Remove four screws (29), four lock.
Caution: Do not attempt to remove the
cast-in bearing liner from end bell (34).
washers (30), four washers (31), sixteen in-
sulating washers (32), and four insulating tubes
3-2. Inspection Requirements
(33), from end bell (34). Do not remove four
a. Refer to table 31 for detail inspection re-
electrical contact holders (28 ) unless damage is
quirements for components of the starter gen-
visible.
erator.
Inspection
Remarks
Inspection Category
Nomenclature