SECTION II. TEST EQUIPMENT, SPECIAL TOOLS, AND MATERIALS

Figure 12. Preservation, Packaging, Packing and Marking Requirements.

Table 2-3. Consumable Materia1s-continued

TM-55-2925-236-40 Starter Generator Part No. 30E20-61-A Manual
Page Navigation
4

TM 55-2925-236-40

SECTION II

TEST EQUIPMENT, SPECIAL TOOLS, AND MATERIALS

2-1. Test Equipment

Refer to table 21 for a list of test equipment required to perform the procedures described in

this manual.

Table 2-1. Test Equipment Required

Part, Model

Nomenclature

Technical Description

or Mil Des

FML

Model 40B

Balancing Machine

Used to Balance Armature Assembly.

06365

1650A

24655

Used to Check Capacitor Values.

Capacitance Bridge

Used to Perform Insulation Breakdown

13700-1C

19315

Insulation Breakdown Test Set

Tests.

70855

Used to Provide Load Conditions for

Electrical Test Stand

99664

Performance Testing.

Used for Performance Testing of

7199-1

Aircraft Generator Test Stand

99664

Starter Generator.

Type B-1

Used to Test Starter Generator Torque.

99664

Starter Torque Tester

Note. Equivalent teat equipment may be used.

Table 2-2. Special Tools Required - Continued

22. Special Tools

Refer to table 22 for a list of special tools re-

Part, Model

Nomenclature

or Mil Des

quired to perform the procedures described in

this manual.

Bearing Retainer Puller

1106269

Setting Gage

1106353-1

Table 2-2. Special Tools Required

Interface

1106354-1

Nomenclature

Note. All tools listed above are manufactured by The

Bendix Corporation, Electric Power Division, Eatontown,

QB80059-3

Spline Wrench

New Jersey. Equivalent tools may be used.

QB80277-1

Brush Spring Hook

1106005-1

Brush Box Aligner Pilot

2-3. Consumable Materials

1106006-1

Brush Box Aligner

1106023-1

Bearing Puller

Refer to table 2-3 for a list of all consumable

1106140-3

Spring Scale

materials required to perform the procedures de-

1106149

Rotor Stand

scribed in this manual.

1106187

Generator Overhaul Stand

Table 2-3. Consumable Materials

Specification

Number

Item No.

Title

Nomenclature

MIL-T-7003

Trichlorethylene, Stabilized Degreasing

Trichlorethylene

P-D-680

Dry Cleaning Solvent

Solvent

CCC-C-440

Lint-free Cloth

Cloth, Cotton, Cheesecloth, Bleached and Unbleached

MIL-L-7870

Lubricating Oil

Lubricating Oil, General Purpose, Low Temperature

MIL-C-4339

Corrosion Preventive, Soluble Oil

Corrosion Preventive

TTS-271

Shellac, Dry

Shellac

MIL-A-6091

Alcohol, Ethyl, Specially Denatured, Aircraft

Dentured Alcohol

Soldering Process, General Specification for

MIL-S-6872

Soft Solder

Type CR-1056B

Epoxy Resin (red)

(FMC 72688)

2-1

Privacy Statement
Press Release
Contact