TM 55-2925-236-40
1-4. Description
Characteristic
Item
The starter generator is a brush-type rotating
30 v
Rated Voltage
machine capable of delivering 30 volts dc at a
Rated current
300 amp
rated current of 300 amperes, when driven at a
Rated speed
4000-8600 rpm
speed within its rated speed range. The unit is
Minimum Speed for Regulation
4400 rpm
10,000 rpm
Maximum Speed for Regulation
self-cooled by means of an integral fan rotating
40C (max)
Cooling Air
with the output shaft. A terminal board is
47 lb (approx)
Weight
6-1/2 in.
Diameter (Housing)
mounted' on the housing to facilitate external
10-7/8 in.
Length (Housing)
connections. Slotted mounting holes are provided
16 teeth
Outside Spline
for ease of installation on the engine.
Mounting Bolt Circle Diameter
5.000 in.
6
No. of Mounting Slots
Counterclockwise
Rotation (Viewing Drive. End)
Refer to table 1-1 for leading particulars of
up surfaces if required
Repainting or touching
shall `be done in accordance with table 1-2.
the starter generator.
No.of
Paint Type and
Method of
Coats
Notes
Index No.
Specification
Application
Item Name
Fig. No.
Brush
1
Paint Flange and Rear
MIL-P-8585, Primer
Fan Housing
16
Face Only
MIL-E-5557, Type I,
Brush
2
Color Black, Enamel
Brush
1
No Paint or Prime in
84
MIL-P-8585, Primer
End Bell
2
Area Covered by Brush
Brush
MIL-E-5557, Type I,
Access Cover or in
Color Black, Enamel
Bearing Mounting Surface
Preservation, packaging, packing and marking shall be in accordance with figure 1-2.
